Most Frequently Asked Hardware / Parts Questions

What is the thread size of our machine screws?
10/32 thread

What is the thread size of our wood screws?
#12 tread

How do I remove Gun-Tite?
Our Gun-Tite is removable unlike other Lock-Tite products that are made to be permanent. If applied and hardened, using a hair dryer, heat up the area where you want to remove it. It will heat to a gummy substance, which you can wipe off with rubbing alcohol or lacquer thinner. Repeat as needed.

Do you have a hammer extension for a Thompson Center Firearm?
We do not have anything! Thompson Center does not recommend using them on their firearms therefore we discontinued ours.

Can I install a barrel band on my extended mag tube?
No, it will compress the tube and mess up the spring and follower.

How do I install a stud in the buttstock of my shotgun?
Is it hollow? Most shotguns will have a section where the manufacture has added more material for a stud installation. Before the customer drills any holes, recommend that the customer remove the recoil pad to determine where the thicker section is. If there is not a section that is thick enough to use a 1/2" wood screw, send the customer a machine screw with a nut.